Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Wheels

Strider Aluminum Wheelset w/Tires & Tubes
$59.99
Kids wearing out their Strider? That's a good thing! Upgrade their out-of-doors adventures with these aluminum wheels. These lightweight 12-inch wheels are a great upgrade for trail riding and come with tires and tubes.
Zipp 303 Firecrest Carbon Disc Brake Rear Wheel (Clincher)
$1,300.00
Zipp makes the impossible possible with their 303 Firecrest Carbon Disc Brake wheels—they're equally at home on the flats as they are in the mountains. The 45mm-deep rims slice through the wind more efficiently than even many deep-section wheels thanks to their 28.5mm-wide dimpled rims. And, by creating a seamless junction between rim and tire, the increased width further reduces drag. The 303s climb with the best and re-accelerate out of corners like rockets since they barely register on the scale, which makes them a must-have on undulating terrain. The extra wide rim also allows running wider tires at lower pressures with less fear of pinch flatting, which boosts ride quality and comfort and reduces rolling resistance. Plus, Zipp's 77D/177D disc hubs gives you incredible stopping power in wet and dry conditions alike, and they're thru-axle compatible (sold separately) for jaw-dropping steering precision and power transfer. You also get Sapim's oustanding CX-Ray spokes.
DT Swiss M 1700 Spline 35
$387.00 - $546.00
For riders looking for more — more grip, more capability — the M 1700 SPLINE 35 is the right choice. Wearing some plus size tires, this wheelset will carry you far into all mountain terrain. Offering an almost unbeatable ratio of affordability, high-end components, and build, it is the workingman's wheel. Its simple and durable straight-pull construction with DT's high precision Ratchet System hubs make it so reliable and easy to use, that all that's left for you is to focus on the ride and think about the next adventure.
Whisky Parts Co. No.9 30w Rear 29-inch
$875.00
Whisky No.9 30w carbon tubeless wheels are the most versatile performance wheels offered by Whisky. The No.9 30w rims have a 24mm internal width that supports a variety of tires from road plus to standard mountain sizes and feature hookless walls for easy tubeless setup and impact resistance. The No.9 30w wheels are light and wide, providing great versatility no matter where your ride takes you. - Centered around DT Swiss 350 hubs, well-known for their balance of performance, weight and tool-free serviceability - Laced with j-bend DT Aerolite spokes and brass nipples for durability and serviceability - Includes Whisky tubeless valves and tape
Zipp 404 Firecrest Carbon Clincher 77 Rim-Brake Front Wheel
$1,000.00
If you had to choose just one wheel, the 404 Firecrest should be your choice. With the depth and shape proven in all conditions, it’s the all-around performer and the standard by which all other wheels are measured. Its 58mm rim depth is a classic all-around performer that has carried athletes to victory in every kind of event and situation – every triathlon distance, breakaways, field sprints, and hilly finishes. At the center of the 404 Firecrest is Zipp’s 77/177 hubset with best-in-class durability and improved bearing protection with no pre-load adjustment needed. The result is improved stiffness, durability, simplicity, and versatility. - Firecrest rim Technology provides world-class handling and stability - 77/177 hubset, with its best-in-class durability and improved bearing protection, all with no pre-load adjustment needed - Aero performance, durable and Light Weight - ISO 4210 compliant. See Declaration of Conformity for details
DT Swiss XMC 1200 Spline 30
$1,224.00 - $1,672.00
The XMC 1200 SPLINE is for anyone who enjoys high-speed climbing and descending. Fit with tubeless tires, the full carbon hookless rim massively reduces the chance of punctures, is super-light, and at 30mm rim width, works to perfection with wide all mountain rubber. The SPLINE hub is the lightest wheel hub ever built by DT Swiss, together with the bladed top end spokes and a perfect DT Swiss wheel build, it complements the carbon rim for the ultimate trail bike wheel set.
Race Face Aeffect R 27.5-inch Front
$224.99
Boasting a 30mm internal rim width and increased strength, the Aeffect R is built to shred aggressive all-mountain trails and Enduro races. In addition to a great rim, the Aeffect R incorporates a new Race Face Trace hub design with full cartridge bearings for extended life and durability. The hub also boasts a competitive 9.2-degree of engagement using a durable 3 pawl design. These hubs are tough, think a Clydesdale with a motor kind of tough. Aeffect wheels can handle almost anything you can throw at them. - Brushed finish, water transfer graphics - One spoke length throughout wheelset - Rim decal kits available separately in 8 colors (sold separately) - 9.2-degree hub engagement - Standard 6 bolt brake rotor mount - Extra spokes (5) included with rear wheels - Straight pull Double Butted spokes with Silver Brass nipples
Sun Ringle Mulefut 50SL Wheelset
$209.99 - $289.99
A new method of attacking the trail is on the horizon and about to take the mountain bike community by storm. PLUS SIZED 3.0 tires provide faster acceleration combined with increased tire patch for superior traction and added cushion. Introducing the SUNringlé Mulefüt 50! PRODUCT SPECS: - STR SUNringle Tubeless Ready - 50mm rim width - Premium cartridge bearing straight pull hubs - Quick release front axle 100x15 and 110x15 - Rear axle options: 142x12, 148x12 - Wheelsmith straight pull double butted spokes - Wheelsmith brass nipples - 32 hole count - Weight / Set: 2220g (27.5") 2310g (29")
Zipp 30 Course Rim-brake Clincher
$445.00 - $555.00
Performance, durability, and versatility. Zipp checks all the boxes with its 30 Course Rim-brake Clincher wheelset. A wide 21mm internal rim profile delivers speed, stability and comfort over a variety of surfaces, and Zipp's 71/177 hubset provides smooth and efficient power transfer. Sapim CX-Ray spokes and redesigned ergonomic skewers round out this excellent all-around package. Each wheel includes rim tape, a tubeless valve, and a 1.85mm spacer for use with 10-speed cassettes.
Spank Oozy Trail 345 Wheelset
$649.00
Up your width, up your traction, up your stoke! SPANK Industries’ OOZY Trail 345 Wheelset is hand built and trued to industry leading standards. 32H straight-pull OOZY Trail Hubs offer increased engagement and adaptability, and utilize unique over-sized SSL (single spoke length) flanges to improve contact and support between spokes, delivering enhanced stiffness, durability, and spoke torque retention. Laced with Spank’s 30mm internal width OOZY Trail 345 Rims, the OOZY Trail 345 Wheelset combines the strength and rigidity of SPANK’s patented Oohbah reverse-well rim profile with the unparalleled tubeless performance of Bead Bite anti-burp rim hooks. The result is a wide-set, bombproof wheelset that’s both lightweight and comfortable on any terrain. - Key technologies: Bead Bite, OohBah, Bead Nip, Dynamal Alloy, MGR - Freehub: alloy - Shimano (XD available) - Adapters Included (mm): FRONT: 20x110 REAR: QRx135 - Adapters Available (mm): FRONT: QR / 15x100 / 20x110 REAR: QRx135 / 10x135 / 12x135 / 12x142 - Tubeless: Tubeless equipped (tape & valves included) - Discipline: trail
Stan's NoTubes Crest MK3 29 Rear Wheels
$370.00
Wider and even lower in profile, the Crest MK3 sheds weight for faster acceleration and climbing. WideRight 23mm internal width increases tire volume for improved stability with wider tires. Inspired by Stan's carbon technology, the entirely new rim shape adds strength and virtually eliminates the chance of a tire pinch flat. Refined over the past 15 years, Bead Socket Technology offers the most trusted tubeless seal in the business, making the Crest MK3 the best choice for lightweight, tubeless XC performance. Crest MK3 wheels include: pre-installed tape for tubeless use and presta valve; 12x142mm rear wheels also include quick-release end caps and quick release. - 23mm internal rim width for more stability with larger tires - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - Laterally stiffer and stronger for improved handling - Wider but even lighter than the original Crest - More durable rim shape and alloy - Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples - Legendary Crest climbing and speed in a high volume rim
Stan's NoTubes Flow MK3 29 Front Wheels
$309.00
The new Flow MK3 is wider, stronger, and lighter. The Flow’s legendary history on the World Cup DH circuit, combined with WideRight 29mm internal width offers the perfect balance of tire stability for outstanding control at any speed. Genuine Bead Socket Technology rolls faster, corners harder, and withstands even bigger hits. Combined with a new shape, the Flow MK3 is born and bred for control at speed and perfect for technical trails and enduro racing. Laterally stiffer and more durable, the new alloy is also even lighter, putting the new Flow MK3 in a class by itself for all-mountain performance. Flow MK3 wheels include: pre-installed tape for tubeless use and presta valve; 15x100mm front wheels include quick-release end caps and quick release. - 29mm internal width for tires up to 2.8-inches - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - Even lighter than the Flow EX - Laterally stiffer and stronger for improved handling - 25% stiffer and stronger for improved handling - More durable rim shape and alloy - Neo hubs accelerate quicker and last longer - Built on the proven success of the Flow EX on the World Cup DH circuit - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples
Stan's NoTubes Crest MK3 27.5 Front Wheels
$309.00
Wider and even lower in profile, the Crest MK3 sheds weight for faster acceleration and climbing. WideRight 23mm internal width increases tire volume for improved stability with wider tires. Inspired by Stan's carbon technology, the entirely new rim shape adds strength and virtually eliminates the chance of a tire pinch flat. Refined over the past 15 years, Bead Socket Technology offers the most trusted tubeless seal in the business, making the Crest MK3 the best choice for lightweight, tubeless XC performance. Crest MK3 wheels include: pre-installed tape for tubeless use and presta valve; 15x100mm front wheels include quick-release end caps and quick release. - 23mm internal rim width for more stability with larger tires - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - Laterally stiffer and stronger for improved handling - Wider but even lighter than the original Crest - More durable rim shape and alloy - Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples - Legendary Crest climbing and speed in a high volume rim
Stan's NoTubes Crest MK3 27.5 Rear Wheels
$370.00
Wider and even lower in profile, the Crest MK3 sheds weight for faster acceleration and climbing. WideRight 23mm internal width increases tire volume for improved stability with wider tires. Inspired by Stan's carbon technology, the entirely new rim shape adds strength and virtually eliminates the chance of a tire pinch flat. Refined over the past 15 years, Bead Socket Technology offers the most trusted tubeless seal in the business, making the Crest MK3 the best choice for lightweight, tubeless XC performance. Crest MK3 wheels include: pre-installed tape for tubeless use and presta valve; 15x100mm front wheels include quick-release end caps and quick release. - 23mm internal rim width for more stability with larger tires - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - Laterally stiffer and stronger for improved handling - Wider but even lighter than the original Crest - More durable rim shape and alloy - Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples - Legendary Crest climbing and speed in a high volume rim
DT Swiss E 1900 Spline 25
$183.00 - $289.00
Enduro riders push the limits of traction. The E 1900 SPLINE is the ideal wheel for this purpose with its 25mm wide, extra-strong aluminum rims and solid wheel construction. Weight-saving details such as the extensively machined hubs and the spherical DT Squorx aluminum nipples will keep you smiling in the uphills too. After all, the best trails are rarely found right next to the chairlift.
DT Swiss EX 1501 Spline ONE 30
$565.00 - $776.00
With even the EWS race courses getting tougher and tougher and tire manufacturers offering Enduro-strong tires in 2.5-inch sizes, the demand from DT's pros for a wide, Enduro tough wheelset came up and DT responded by developing the EX 1501 SPLINE ONE 30. Often used as a front wheel to generate as much grip where you need it most, it is the wheel for those hunting after the toughest of tracks or those living right in the Alps. Strong, lightweight, and tough as nails, the EX 1501 30 is ready for just about anything.
DT Swiss XR 1501 Spline ONE 25
$552.00 - $750.00
Responding to the demand from top racers for even wider rims, DT have developed an XC-specific 25mm-wide rim profile. This is what's built into the XR 1501 SPLINE ONE 25. The result is a super capable, super light Cross Country wheel. It feels perfectly at home on the trails that have become tougher and rougher both up and down the mountain. And built with DT Swiss quality in every detail, from the hub internals to the spoke nipple, it makes sure you complete all the laps, weekend after weekend.
DT Swiss XRC 1200 Spline 25
$1,185.00 - $1,633.00
The new standard in modern day, high performance cross ccountry wheel sets. Coming with a generous 25mm wide hookless full carbon and tubeless-ready rim, the XRC 1200 SPLINE 25 strikes the perfect balance between low weight and aggressive riding readiness. The lean, CNC machined hubs are super-light while the 25mm tall rim has the inherent stiffness necessary for efficient riding and to precisely hold a line. Together with the renowned DT Swiss build quality, this wheel is what everyone looking to go fast up and down has been waiting for.
DT Swiss HX 1501 Spline ONE 35
$638.00
Plus size tires are a dilemma: All of a sudden you find yourself riding sections where you previously dismounted, and you're doing so at a good pace. That's a lot of fun. On the other side it makes it pretty tough on your bike and especially the wheels. With the HX 1501 SPLINE ONE 35 DT have succeeded to deliver alloy wheels able to bridge the gap. Created with all of DT Swiss' know how and passion, it is light and reliable but loves to smash into the rough like no other.
DT Swiss ARC 1100 Dicut 62 Non-disc
$1,316.00 - $1,830.00
Aero meets All-around: The ARC 1100 DICUT 62 is ridden by DT Swiss athletes in long distance triathlons, as well as in flat stages of the Tour de France. Adding to it's versatility is the Aero+ concept: It is the category leader when it comes to low drag numbers but at the same time it is easy to handle in every wind situation. Hubs equipped with SINC ceramic bearings and ultra-lightweight components throughout are there to make you roll smooth and fast, no matter if you're fighting against the wind on your time trial bike or trying to escape the bunch on the final meters to the line.
DT Swiss ER 1600 Spline 32
$328.00 - $434.00
Riders known for being hard on their wheels, for not avoiding potholes, and for out sprinting people in full pro kit while on their way to do the groceries should take a close look at the ER 1600 SPLINE 32. A high-end welded alloy rim with a huge cross section laced to wide aero spokes leave you with nothing left to desire. And don't be fooled by the classy looks and a silky smooth Ratchet System hub, because the ER 1600 SPLINE 32 really is all about hard riding and reacting to power coming from the strongest of calves.
DT Swiss PR 1400 Dicut OXIC 21
$552.00 - $763.00
The pinnacle of aluminium road wheels. The ceramic OXIC surface coating brings brake performance to rim brakes like it has never be seen before. The rims are wide, asymmetric, and lightweight, making for an outstanding stiffness-to-weight ratio. If set up tubeless, supreme comfort and grip are added to the athletic character. Finally, at just 1435g, this wheelset is both extremely practical and competitive, very much in tune with its stealthy appearance.
DT Swiss PR 1600 Spline 23 Non-disc
$315.00 - $420.00
Comfort and speed combined. The PR 1600 SPLINE 23 work perfectly with the new breed of wider road tires. These bring about more comfort in the saddle and more grip even when the tarmac turns less and less smooth. The result is a faster, more relaxed ride. Together with the laterally stiff build which uses high end bladed spokes, the PR 1600 SPLINE 23 lets you tackle even the last climb of the day with enough energy to enjoy the looks of the hubs and to plan your next big ride.
Campagnolo Bora Ultra 35 Tubular Wheelset
$3,335.00
Whether you're looking to take it to the limit on a climb or throw down in a sprint, Campagnolo's Bora One 35 wheelset is where it's at. The 35mm deep-dish carbon rims and aero spokes are exactly what you need to slice through the wind and move to the head of the pack. They're also feathery light to give you a boost when the road turns uphill. And, the aluminum hubs house USB hybrid ceramic bearings for a zippy ride. Plus, the Boras come with Campy's legendary quick-releases, too. - 35mm carbon rim means greatly reduced weight - Clincher version ensures easier bike maintenance and management - The rim has exactly the same structure as that of top-of-the-range wheels - The aluminum hubs and ceramic USB bearings ensure performance at a lower price - Its 35mm high rim gives this wheel good performance on long stretches on the flat where even the aerodynamic factor is important - All the Campagnolo know-how in the field of carbon makes this wheel lightweight and perfect for longer steeper climbs - Wheel is for tubular tire only - Weight: 1,170 grams
SRAM Rise 60 27.5-inch Front Wheel
$950.00
When unparalleled speed and pedaling efficiency is what you desire, SRAM's Rise 60 Front Wheel rises to the occasion. This featherweight hoop with Carbon Tuned rims and butted stainless spokes blend just enough strength and stiffness with an impeccably low weight. Once they start spinning, there's almost no stopping the incredibly smooth, durable Speedball Ceramic bearings. The hook-less rim design results in a wheel that’s lighter, stronger and more resistant to the impact of XC racing. DOUBLE TIME hub and pawl geometry integrates seamlessly with any ride for a frictionless experience on the trail. Quicker bursts, tighter turns, better rolling and easier climbs. Softer landings and smoother descents. Bigger wins. Louder cheers. Every wheel connects you to the ground. Only a few can carry you to new heights. - Intended use: XC and Trail - CARBON TUNED rim for tubeless clinchers - Customizable decal kit - Front axle compatibility: 9x100 QR, 9x100 QR OS, 15x100 - Tire Type: Tubeless Ready Clincher - Rim Joint: Carbon - Eyelets: None
Quality Wheels SRAM 406 6-bolt / Sun SR25 26-inch Rear
$95.00
Quality Wheels Value Series Disc Rear Wheel 26 SRAM 406 6-bolt / Sun SR25 Black
ENVE SES 3.4 Clincher ENVE Carbon Wheelset
$3,000.00
What It Is A climbing wheel with an aero advantage designed to be ridden in the mountains. Who it's for Road cyclists who require maximum versatility for riding in mountainous terrain and variable weather conditions. Why we made it Since the introduction of the original SES 3.4, we’ve implemented new design concepts across the SES lineup that result in a faster wheel and improved ride experience. The SES 3.4 features road tubeless compatibility, 25mm tire optimization, molded carbon brake track technology, and optimized SES aero rim shaping to ensure maximum efficiencies for a shallow aero wheel. Equally at home in the mountains as in the valleys, the SES 3.4 is the most versatile Smart ENVE System aero wheel. Like all SES wheel models, the SES 3.4 features dissimilar rim shapes and geometries between the front and back wheels to maximize aerodynamic efficiency and rideability in variable wind and weather conditions. The front rim is 38mm deep and shallower than the rear rim to aid in crosswind stability while rear rim is 42mm deep and therefore improves overall airflow. For riding in mountainous terrain where heavy braking is required, the SES 3.4 features a high-temperature-resistant resin system and ENVE's molded-in brake track technology to ensure rim integrity and precision braking when and where it is needed most.
Zipp 302 Carbon Clincher 700c Rear
$845.00
With a 45mm deep Indianapolis-made carbon rim, optimized for low aerodynamic drag and precise handling in all riding conditions, the 302 Carbon Clincher delivers the ride that Zipp wheels are renowned for at a price that makes Zipp carbon quality and performance more attainable than ever. The 302’s smooth carbon rim is hand assembled to Zipp’s new 76/176 hubs using Belgian CX-Sprint spokes and brass spoke nipples to build a wheel that is both fast and reliable—tough enough to survive the Spring Classics or the road less traveled, yet light enough to tackle the steepest grades. The 76/176 hubset’s axle end caps and rear freehub can be removed without tools for quick and easy cleaning and lubrication. Additionally the J-bend spoke design allows for easy sourcing of replacement spokes. And like all of Zipp's carbon clinchers, the rim bed of the 302 is designed to make installing and removing tires fast and easy. Experience Zipp speed with the 302. Each 302 Rim-Brake Wheel Includes: - Zipp valve extenders - Zipp rim tape - Zipp Tangente quick-release skewers
Shimano Dura-Ace R9100 C60 Carbon Clincher Front 700c
$744.99
Shimano's Dura-Ace C60 carbon clincher wheel provides improved rigidity thanks to a wide flange hub and offset rim so you can reach that next level of aerodynamic performance. - For the performance driven triathlete and road racer - Wide section rim - Ultra-light full carbon rim
Shimano Dura-Ace R9100 C40 Carbon Clincher Wheelset 700c
$1,579.99
The lightweight Dura-Ace C40 Carbon Clincher wheelset is the ultimate all-rounder. Yet, it’s still aero thanks to the wide rim you’ll see at the C40. This carbon wheelset has an increase in rigidity for improved aerodynamic performance, while maintaining a comfortable riding experience. Its braking, handling and acceleration are top notch. - Responsive acceleration - Wide section rim - Carbon laminate rim
Stan's NoTubes Baron S1
$479.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Baron S1 Wheelset - Use: Plus Tire Performance, Adventure, and Trail - Internal Rim Width: 35mm - Optimal Tire Size: 2.8 to 3.2-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock - Brass Silver Nipples - Wheel Sizes and Weights: 26-inch (1,998g), 27.5-inch (2,060g), and 29-inch (2,162g)
Stan's NoTubes Flow S1
$479.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Flow S1 Wheelset - Use: Aggressive Trail, All Mountain, Enduro, and Downhill - Internal Rim Width: 29mm - Optimal Tires Size: 2.35 to 2.8-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock Brass Silver Nipples - Wheel Sizes and Weights: 27.5-inch (2,034g), and 29-inch (2,134g)
Stan's NoTubes Major S1
$479.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Major S1 Wheelset - Use: Plus Tire Adventure and Trail - Internal Rim Width: 38mm - Optimal Tire Size: 3.0 to 3.5-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock - Brass Silver Nipples - Wheel Sizes and Weights: 26-inch (2,030g), 27.5-inch (2,094g), and 29-inch (2,198g).
DT Swiss XM 1501 Spline ONE 30
$565.00 - $776.00
The XM 1501 SPLINE ONE 30: a whole lot of wheel. Fit with high volume tires it will eat up the roughest of descents you can throw at it, and it will climb to those trailheads with ease. Really the perfect size for demanding all mountain riders, it features DT's famous aluminum rim construction, proven on World Cup downhill and EWS levels. The DT Swiss wheel build quality and the unmatched Ratchet System hubs complement this extremely capable package, made to dominate the mountain.
DT Swiss ERC 1400 Spline 47
$1,092.00 - $1,514.00
Our benchmark setting Aero+ rim matched to a punchy mix of top end aerolite and laced to premium Ratchet System hubs makes for a wheel that delivers in all riding situations. Fitting 28 mm tires on its wide rims will give you all the comfort and grip needed for extended rides on mixed surfaces. At the same time, in combination with 25 mm rubber, the ERC 1400 SPLINE with will aero optimize your race bike, ready for you to set your own, new benchmarks.
Campagnolo Bora Ultra 50 Clincher Wheelset
$3,610.00
Innovating the wheel that for years has been a market benchmark might have seemed difficult and risky, but the Campy Tech Lab designers have managed to maintain those characteristics of flexibility and ease of handling that have made this high-profile wheel easy to steer, high performing and safe. The Bora Ultra 50 bursts onto the market not only with introduction of the new tire bed dedicated to the clincher, but also with improvements to the previous version in terms of lightness, aerodynamics, stiffness and comfort thanks to use of the new wider rim and front and rear hubs with different diameters. The 2018 range sees the addition of the new AC3 (All Conditions Carbon Control) Technology braking track, which brings braking safety on wet terrain closer to that on dry. Plus, extremely clean-cut aesthetics guaranteed by innovative water-transfer graphics. All without giving up on the extreme smoothness, which has become the market benchmark and is the result of use of CULT bearings. - 50mm Full Carbon rim guarantees the best quality available on the market - Long-lasting smoothness is ensured by CULT bearings, nine times better performing than a standard solution - Internationally one-of-a-kind AC3 technology guarantees unique performance by the Bora Ultra 50 also when braking - Excellent grip between brake pad and rim allows for gradual, constant braking and shorter stopping distances, even in wet conditions - Dedicated brake pads (red compound) guarantee reliability and durability - Aerodynamic spokes, wider profile, carbon hubs, CULT bearings, self-locking aluminum nipples, oversize flanges and much more - The distinctive G3 design of the rear wheel guarantees excellent stiffness and an unmistakable look - Weight: 1,435 grams
Zipp 202 Firecrest Carbon Clincher Tubeless Disc Brake 700c Front
$1,150.00
The 202 Firecrest Carbon Clincher is a stiff, lightweight and aerodynamic speed weapon ideal for every road. That's the power of Firecrest and Carbon Clincher technologies. The new 202 is the lightest entry in the Firecrest Carbon Clincher lineup, a do-it-all classic road wheel. - Firecrest rim technology affords the rider more speed, more stability, and more strength. This technology offers stable, predictable handling, and the wider rim increases lateral stiffness while offering greater vertical compliance - 77D hubset, with its best-in-class durability and improved bearing protection, all with no pre-load adjustment needed - Aero performance, sprinting stiffness and light weight - Tubeless ensuring secure performance even when ridden at lower tire pressures - Max recommended rider weight 250lbs - Max tire pressure 125psi Each Wheel Includes: - Zipp Tangente Quick Release Skewer - Zipp Tubeless valve – factory installed - Tubeless rim tape – factory installed - Valve core removal tool - Zipp 77D/177D thru-axle caps to fit 12x100, 15x100 dropouts for front wheels
Zipp 303 Firecrest Carbon Clincher Tubeless Disc Brake 650b Rear
$1,350.00
Road bikes are going where they’ve never gone before, are expected to do more, and are being ridden harder than ever. At the same time disc brakes are rewriting the rules of what’s possible with rim design. For this new era, the Zipp 303 Firecrest Tubeless Disc-brake wheelset sets the new standard. With a disc-specific, tubeless rim, the 303 Firecrest Carbon Clincher is now internally 21mm wide and faster than ever. Designed from the start as a tubeless rim, the 303 Firecrest features a rim bed made with internal ridges to lock the tire’s bead in place, ensuring secure performance, even when ridden at lower tire pressures. A new carbon fiber layup keeps weight low while maintaining the 303’s legendary durability. The rim’s lightweight design allows the 303 to glide up the steepest climbs while SRAM's robust 77/177D hubset keep the wheels stiff and responsive. Each Wheel Includes: - Zipp Tubeless valve extender and valve-core wrench - Zipp rim tape (factory taped) - Zipp Tangente quick-release skewer - Zipp thru-axle end caps
Stan's NoTubes Arch CB7 27.5-inch Rear
$720.00
Stan's Arch CB7 is the ultimate carbon trail wheel. It's light enough to respond instantly from the first pedal stroke, and durable enough for the Enduro World Series circuit. With a focus on ride quality, the Arch CB7 features a special layup and shape that deflects up to 10mm radially to soak up speed-robbing impacts, all while being laterally stiffer than just about every other carbon and alloy rim on the planet. The Arch CB7 rims also feature Stan's patented Bead Socket Technology, the original tubeless-ready rim design that has become the foundation of all current tubeless-ready systems. This wheel rolls on an updated Neo hub featuring a Durasync 6-pawl freehub with fast 10-degree engagement. The 100% CNC-machined hub shell and smoother-rolling centerless ground axle help ensure long life and reliable performance. - Arch CB7 wheels include pre-installed tubeless tape and presta valves - Designed for trail riding and enduro racing - Low-profile sidewalls promote proper tire shape and reduce rim weight - 100% CNC-machined hubs with 6-pawl simultaneous engagement - Sapim Race 2.0/1.8/2.0 spokes with Secure Lock aluminum nipples - RiACT system absorbs impacts and rolls faster - Patented Bead Socket Technology rim shape offers easier tubeless inflation and more reliable seal - WideRight rim design optimized for 2.25 - 2.50" tires
Zipp 404 Firecrest Carbon Clincher Rim-Brake Rear Wheel
$1,200.00
If you had to choose just one wheel, the 404 Firecrest Carbon Clincher should be your choice. With the depth and shape proven in all conditions, it’s the all-around performer and the standard by which all other wheels are measured. Its 58mm rim depth is a classic that has carried athletes to victory in every kind of event and situation – every triathlon distance, breakaways, field sprints, and hilly finishes. At the center of the 404 Firecrest is Zipp’s 77/177 hubset with best-in-class durability, bearing protection with no pre-load adjustment needed. The result is improved braking (Showstopper), aero performance, stiffness, durability, simplicity, and versatility. - New, faster, more stable rim profile - AeroBalance - ABLC SawTooth dimples pattern - Showstopper brake track - 10- or 11- speed compatible - XDR option - Handcrafted in the USA
Specialized Stout XC 90 Pro Wheels
$350.00
The Stout XC 90 Pro wheel features a 90mm-wide alloy rim, a front wheel that's designed for use with the RockShox Bluto fork and a rear wheel that includes a XD driver for compatibility with SRAM's XX1 drivetrain. Along these lines, you'll find a stiff, reliable 15x150mm thru-axle. And to ensure that the wheel is up to perform in any condition and over any terrain, the wheel includes sealed cartridge bearings and butted spokes. So it's safe to say that this wheel's balance of lightweight and durability makes it well-equipped to perform on dirt, sand, and snow. - Single-wall alloy rims are 90mm-wide and have been mated with aggressive weight cut-outs and a hookless bead design to create a lightweight, fast-rolling wheel. - Alloy front hub body with two sealed cartridge bearings, 150mm width, and 15mm thru-axle for RockShox Bluto fork compatibility. - Alloy rear hub body includes four sealed cartridge bearings for reliable, all-weather performance, as well as a lightweight alloy cassette body to keep the overall weight down. - Includes a XD driver (installed) for XX1 compatibility, as well as a standard alloy cassette freehub body for use with 10-speed drivetrains.
ENVE M735 27.5-inch I9 Wheelset
$2,550.00
What It Is This wheel is the future of gravity riding and racing. It's ride-optimized, incredibly strong, and debuts the most effective and lightest anti-flat system on the market (ENVE's patent-pending Protective Rim Strip). These wheels will give downhill-oriented riders a new freedom to set their tire pressure for cornering and rock garden stability without sacrificing their confidence to smash track speeds. Who It's For Gravity junkies, Enduro racers, and hard-charging trail riders will find enlightenment riding the M7 Series. A completely new shape and design that massively reduces the risk of pinch flatting and/or damaging the carbon, The M7 Series provides the confidence to ride without limitations. Why We Made It Enduro runs on two things – Confidence and Control. Nothing ruins a good shred fest like a flat tire or broken rim, and nothing spooks you on a dusty trail like an unexpected drift. With this in mind, we have been hard at work over the past 2 years to develop a carbon wheel system that will allow ourselves, athletes, and most importantly – you – to go "full-send" without compromising the ride experience by running high tire pressures, DH tires, and heavy pinch flat reduction inserts. Building upon the platform of the M7 Series' predecessor the M70, we re-profiled the rim to mate up with modern tires and to absorb trail vibrations and chatter. However, just fitting tires is not enough. We know that riders also want the freedom to run lower pressure and that doing so can introduce flat tires and damaged rims. The ENVE solution is a new rim shape paired with ENVE's patent-pending, energy absorbing Protective Rim Strip. With this technology, riders can skip the inserts and run the tires and pressures they want. Amazingly, we've managed to keep the weight neutral and improve impact resistance too.
ENVE SES 4.5 Clincher ENVE Carbon Hub Wheelset
$3,000.00
What It Is The ultimate everyday carbon fiber cycling wheelset and choice of Team Dimension Data. Who it's for Road cyclists and triathletes looking to minimize the trade-off between aerodynamics, lightweight, and stability. Why we made it Because from the moment the first prototypes made the rounds at ENVE, it's been the house favorite. The SES 4.5 rounds out the Smart ENVE System wheel line as a true mid-depth everyday cycling race wheelset. Additionally, the SES 4.5 features a refined shape and construction that yields better acceleration, cornering, impact resistance, and weight savings.
Zipp 404 Firecrest Carbon Clincher Tubeless Disc Brake 700c Rear
$1,350.00
Road bikes are ever evolving and ever inspiring. The new 404 Firecrest Carbon Clincher Tubeless Disc-brake wheelset offers cyclists everywhere the opportunity to experience superior braking and stopping power to match the speed and stability of SRAM's most popular and versatile 58mm rim depth. Aero has never been so affordable and attainable. The consistency and power of disc brakes provides precision modulation and stopping power, literally at your fingertips. As for speed, the 404 Firecrest is where the Firecrest Revolution began. If you had to choose just one wheel, the 404 Firecrest should be your choice. With a depth and shape proven in all conditions, it’s a classic all-around performer and the standard by which all other wheels are measured. At the center of the 404 Firecrest Carbon Clincher Tubeless Disc-brake is the durable and versatile 77/177D hubset, which offers options for riders to switch wheels from quick-release to thru-axle without tools. - Firecrest rim Technology provides world class handling and stability - 77/177d hubset, with its best-in-class durability and improved bearing protection, all with no pre-load adjustment needed - Aero performance, durable and Light Weight - To ensure compatibility with any bike, the versatile 77/177D hubs come with swappable end caps to work with QR’s and thru-axles - Tubeless ensuring secure performance even when ridden at lower tire pressures. - ISO 4210 compliant. See Declaration of Conformity for details.
Shimano Dura-Ace R9170 C40 Carbon Tubular Wheelset 700c
$2,441.99
The lightweight Dura-Ace C40 Carbon Tubular disc-brake wheelset is the ultimate all-rounder. Yet, it’s still aero thanks to the wide rim you’ll see at the C40. This carbon wheelset has an increase in rigidity for improved aerodynamic performance, while maintaining a comfortable riding experience. Its braking, handling and acceleration are top notch. - For the performance driven triathlete and road racer - Wide section rim - Ultra-light full carbon rim - Tubular-specific rims - Center-lock Disc - E-thru axles
Zipp 808 Firecrest Tubular Disc Brake Wheel
$1,250.00 - $1,450.00
Zipp optimized its Firecrest technology to build a highly aerodynamic 82mm rim—the 808 Firecrest Tubular Disc Brake. Designed for efficient power transfer and stable control in time trial and triathlon competition, the 808's wide 27.5mm rim shape provides confident tracking in crosswinds and over rough surfaces. Built with Zipp's excellent 77/177 hubset that features optimized flange geometry and Sapim CX-Sprint spokes to increase lateral stiffness, this 1,1885-gram wheelset combines toughness and reliability in a wind-shedding package that has to be ridden to fully appreciate. Each wheel includes specially-designed Tangente Platinum Pro Evo brake pads, Zipp Integrated Valve Extender with valve-core wrench, rim tape, and quick release.
Spank Spoon 28 Wheelset
$389.00
Finally, a true high-end MTB upgrade wheelset for groms! The SPOON 28 wheelset is a first of its kind wheel upgrade made specifically to service the 20-inch and 24-inch MTB market. Like its big brother the SPANK SPOON 32, the SPOON 28 wheelset is constructed with durable six series alloy and features SPANK’s patented OohBah rim profile, meaning the SPOON 28 is not only strong and stiff, but also safe and reliable. A 23mm internal width accepts a wide range of 24-inch tires, from street to DH. Equipped with hybrid SPIKE Hubs with alloy freehub and internals to minimize weight, the SPOON 28 wheelset adapts easily to most major MTB standards. - Key technologies: OohBah - 20-inch Weight - F/R (g): ±1550 - 24-inch Weight - F/R (g): ±1930 - Configuration: 32H 3 cross lacing - 20-inch Rims: SPANK SPOON 28-20 Rim - 24-inch Rims: SPANK SPOON 28-24 Rim - Front Hub (mm): 6 bolt disc mount - 15x100 - Rear Hub (mm): 6 bolt disc mount - 12x142 - Freehub: Alloy Shimano (XD available) - Adaptors Included (mm): QRx135 - Adaptors Available (mm): FRONT: QR / 15x100 / 20x110 REAR: QRx135 / 10x135 / 12x135 / 12x142 - Spokes: J-hook, brass nipples - Tubeless: Not Recommended - Colors: black / red / blue - Technologies: OohBah, Bead Nip, MGR - Discipline: Kids
Stan's NoTubes Arch MK3 27.5 Rear Wheels (SRAM XD)
$370.00
Designed with input from Stan's Enduro World Series teams, the new Arch MK3 is ready to own every trail. WideRight optimized for maximum stability with 2.25" to 2.5" tires, Stan's expanded the internal width out to 26mm while keeping the rim incredibly light. The 27.5" Arch MK3 weighs only 425g. A new proprietary alloy and stronger, low-profile rim shape means the new Arch MK3 is built to last. Featuring Bead Socket Technology, the new Arch MK3 also offers the unmatched traction, control, and reliability only found on genuine Stan’s NoTubes rims. - The perfect balance of strength and weight - 24% wider than the Arch EX for improved stability with larger tires - Same light weight as the Arch EX - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - 25% stiffer and stronger for improved handling - Lighter and more durable rim shape and alloy - Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples - WideRight optimized for Trail tires / 2.25 - 2.50 - Includes pre-installed tape for tubeless use and presta valve; 12x142mm rear wheels also include quick-release end caps and quick release.
Stan's NoTubes Arch MK3 27.5 Rear Wheels (Shimano)
$370.00
Designed with input from Stan's Enduro World Series teams, the new Arch MK3 is ready to own every trail. WideRight optimized for maximum stability with 2.25" to 2.5" tires, Stan's expanded the internal width out to 26mm while keeping the rim incredibly light. The 27.5" Arch MK3 weighs only 425g. A new proprietary alloy and stronger, low-profile rim shape means the new Arch MK3 is built to last. Featuring Bead Socket Technology, the new Arch MK3 also offers the unmatched traction, control, and reliability only found on genuine Stan’s NoTubes rims. - The perfect balance of strength and weight - 24% wider than the Arch EX for improved stability with larger tires - Same light weight as the Arch EX - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - 25% stiffer and stronger for improved handling - Lighter and more durable rim shape and alloy - Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples - WideRight optimized for Trail tires / 2.25 - 2.50 - Includes pre-installed tape for tubeless use and presta valve; 12x142mm rear wheels also include quick-release end caps and quick release
DT Swiss HX 1501 Spline ONE 30
$611.00 - $809.00
When you head into trouble on the trail, be it up or down, the HX 1501 SPLINE ONE 30 will get you out victorious. It has the power to attack burly terrain and to go fast everywhere else. Sitting right in the middle of the strength-to-weight and strength-to-width range, it works with many tire sizes and is the ideal choice for all E-MTB's meant to be ridden on proper MTB terrain. High end through and through, from the lightweight Ratchet System hubs to the industry-leading alloy rim and profile design, the HX 1501 SPLINE ONE 30 isn't a one-day wonder, but a trusty long-term partner.
DT Swiss XM 1501 Spline ONE 40
$631.00 - $829.00
Firmly standing in the plus category, the XM 1501 SPLINE ONE 40 enables these bikes to show their full potential when matched to the right plus size tire. Set up tubeless, such a bike has most of the possibilities of a fat bike while being light enough to be ridden very, very dynamically. DT's rim profiles, wheel build, and hub technology are so elaborate, they will easily stand up to all the abuse such a plus bike is capable of.
Whisky Parts Co. Whisky No.9 80w Fat Front Wheel
$725.00
Whisky No.9 80w fat bike wheels offer 27.5-inch fat bike riders a light weight, tubeless platform to maximize the inherent rollover and longer contact patch of 27.5-inch fat tires while combating the weight penalty a larger diameter alloy rim can exhibit. Their TBLS beads offer secure tire performance at low pressures. No.9 80w 27.5-inch wheels are entirely hand built in Minnesota to exacting standards with proven DT Swiss 350 Big Ride hubs offering a great mix of performance and reliability. DT Swiss Competition double butted spokes and brass nipples offer serviceability, durability, and strength to produce a versatile wheel for a wide variety of conditions.
Zipp 302 Carbon Clincher Rim-Brake Front Wheel
$655.00
With a 45mm deep rim optimized for low aerodynamic drag and predictable handling in all riding conditions, the 302 achieves this at a price point that makes Zipp carbon quality and performance more attainable than ever. The 302’s Indianapolis-made smooth carbon rim is mated to Zipp's J-bend hubs to assemble a wheel that is both fast and reliable. Assembled by hand in Indianapolis with 20 Belgian Sapim CX-Sprint spokes up front and 24 out back, the 302 is equally suited to training rides or duking it out at your local criterium series. - Rim shape optimized for low aerodynamic drag and predictable handling in all riding conditions - Carbon Clincher - J-bend hubset - XDR Driver Body Compatible
Stan's NoTubes Arch CB7 29-inch Rear
$720.00
Stan's Arch CB7 is the ultimate carbon trail wheel. It's light enough to respond instantly from the first pedal stroke and durable enough for the Enduro World Series circuit. With a focus on ride quality, the Arch CB7 features a special layup and shape that deflects up to 10mm radially to soak up speed-robbing impacts, all while being laterally stiffer than just about every other carbon and alloy rim on the planet. The Arch CB7 rims also feature Stan's patented Bead Socket Technology, the original tubeless-ready rim design that has become the foundation of all current tubeless-ready systems. This wheel rolls on an updated Neo hub featuring a Durasync 6-pawl freehub with fast 10-degree engagement. The 100% CNC-machined hub shell and smoother-rolling centerless ground axle help ensure long life and reliable performance. - Arch CB7 wheels include pre-installed tubeless tape and presta valves - Designed for trail riding and enduro racing - Low-profile sidewalls promote proper tire shape and reduce rim weight - 100% CNC-machined hubs with 6-pawl simultaneous engagement - Sapim Race 2.0/1.8/2.0 spokes with Secure Lock aluminum nipples - RiACT system absorbs impacts and rolls faster - Patented Bead Socket Technology rim shape easier tubeless inflation and more reliable seal - WideRight rim design optimized for 2.25 - 2.50" tires
Stan's NoTubes Baron MK3 27.5-inch Rear
$380.00
The 35mm internal width of the Baron MK3 brings Stan's unmatched traction and control to Plus tires. The Baron MK3 is optimized for 2.80 – 3.20-inch tires, and joins the Sentry and Major to offer the most rim width options for wider tires. The combination of a 35mm rim and Stan's patented ultra-low-profile sidewall means the Baron MK3 keeps you in control on even the most technical trails, while still rolling faster than conventional rim designs. Stan's low profile rim shape is also lighter by design, a great advantage for Plus wheels. The Baron MK3 wheelset includes the Neo hub with CNC-machined shell and updated axle and bearing placement for maximum durability. The cassette body has six pawls for quick engagement and reliable power transfer on the trail. Tubeless performance has never been as fast, easy, and reliable. The Baron MK3 brings out the most in your high-volume tires. Baron MK3 wheels include pre-installed tape for tubeless use and presta valve; 12x142mm rear wheels also include quick-release end caps and quick release. - Patented BST rim shape for improved handling and less rolling resistance with high volume tires - Maximum stability and control with 35mm internal width - Stronger, stiffer, and lighter 6069 alloy and rim shape - Neo hubs with new Durasync freehubs accelerate quicker - Most trusted tubeless system for easy setup and low maintenance - Sapim Force spokes and Sapim Secure Lock aluminum nipples - WideRight optimized for 2.80 – 3.20-inch Trail tires
Specialized Roval Traverse SL Fattie 27.5 148
$1,600.00
Trail wheels often fall into two categories—they’re either heavy and durable or light and flexy. And because of this, a lightweight, wide-profile, and enduro-ready carbon wheel seems like something only found in a fairytale, but lucky for you, we made it a reality. The Traverse SL Fattie 27.5 puts all the flick'able, nimble features you need in an all-mountain wheel into one package, and it has the results to prove it. Along with light overall weight, stiffness, and durability, another top priority for the Traverse SL was ease of use. First off, we got rid of the creaky straight-pull spokes and corrosion-prone alloy nipples. Next up, we landed on 28 J-bend spokes, for both the front and rear wheels, that are all the same length—making it easy to find replacements if needed. And finally, we engineered a new hub design, with a wider profile and higher flange to aid in overall stiffness. What's with the big-boned name, you ask? The Traverse SL Fatties may be wide, but with a 30mm inner rim width, they’re far from the girth of a fat bike rim. But let's talk width. You've probably noticed that mountain bike rim widths have hovered between 19 and 23 millimeters for decades, and they've been long overdue for a change. In the search for a better wheel design, our engineers began testing 2.3- to 2.5-inch tires on 45-millimeter-wide fat bike rims to see what, if any, benefits could be found. It only took them a few rides to realize that the wider rims offered a variety of advantages, like adding additional tire volume, which better supports the tires in hard cornering, greatly improves traction because of the ability to run lower pressures, and noticeably increases rim stiffness. They did note that there is an occurrence of diminishing returns with increasing width, however, and after testing everything from 25 to 45mm, determined that a 30mm inner width is optimal. After determining the width, we began designing the rim using the knowledge that we gained when developing the Control SL. With this, we started with our Zero Bead Hook technology that gets rid of the weak spot found in a traditional wheel, and combined it with the wider profile to make a carbon rim that effectively dissipates forces. This way, you can take abuse from rocks without the worry of cracks or dents. Ok, so they’re strong, impact-resistant, and tire supporting—they must be heavy, right? Wrong. Even though “fattie” is in their name, they're far from fat. To achieve this weight, we hand-build our rims to our own alloy hubs, using only the highest quality DT Swiss Competition Race spokes. Inside our hubs, you'll find DT Swiss 240 internals with a quick engaging 54t DT Swiss star ratchet system in the rear that allows you to power over rocks and roots without delay. And while machines do a pretty good job of building wheels, we choose professionally trained humans because they do so with an artistic touch that makes for minimal flaws. Whether you need a carbon wheelset to get you through an enduro stage or one to shred your local rock garden, the Traverse SL Fattie has you covered.
Specialized Stout XC SL 29 Front
$115.00
The new Stout XC SL 29 front wheel includes a strong, double-wall alloy rim, stainless steel spokes, brass nipples, and a reliable Shimano Center Lock hub. Charcoal decals complete the look, making this a perfect OE replacement or XC-ready upgrade. - Lightweight and reliable Shimano hub. - Double-wall, disc-specific rim is strong and durable. - Brass nipples hold spoke tension securely and resist rust for added durability. - Stainless spokes won't rust, easing long-term maintenance.
SRAM Roam 60 B1 27.5+ Rear Wheel
$1,000.00
The ROAM 60’s careful combination of shape, width, design, and materials yields a carbon wheel that gives bikers the speed-enabling features they want—and the critical reliability they need. Lightweight, high-strength 36mm (external width) carbon rims increase control and confidence in any terrain.The precision engagement of DOUBLE TIME hubs ensure quick, consistent power delivery from the pedals, and a durable, smooth-rolling feel. The ROAM 60 is the wheel for riders who want everything and don’t like to compromise. - Light and strong carbon rim designed for more speed, more control, and more reliability - Wide profile, hookless, tubeless ready, carbon rim - Smooth, quick engagement with durable DOUBLE TIME hubs - Stealthy new graphics and customizable sticker pack - The B1 version has 36mm wide rims. - Wide rim works well with traditional and plus size MTB tires - One size spoke fits the entire wheel model: front left and right, rear left and right - Skewer Included: No - Tire Type: Tubeless Ready Clincher
Campagnolo Scirocco Disc Brake Wheelset
$680.00
The Scirocco Disc Brake is a sturdy, precise aluminium wheel with sophisticated solutions, like straight-head spokes and the 2-Way Fit Ready profile, assembled in a highly competitive race-ready package. This wheel has character and can quite easily take on the role of the cyclist's only wheel or the perfect training partner, offering an aerodynamic advantage and effortless rideability. It is ideal for aerodynamic race bikes and it responds perfectly to the needs of both triathletes and roulers who looking to perform well on climbs. Every watt will enhance performance, every turn will be carried out with precision. Additionally, the very comfortable features of the internal width of 19 mm will shine in the Endurance segment.
Easton EA90 SL Front
$374.99
We’ve upgraded our venerable EA90 SL wheels, dropping weight and increasing strength. Now, for the first time, Easton is making a tubeless ready wheelset. This allows for durable Sapim straight-pull spokes with standard nipples, enhancing durability and reducing the need for proprietary parts. A completely redesigned rim features a category-leading 19.5mm internal rim in a deeper and stiffer 27mm blunt shaped rim that borrows from our aerodynamic Fantom shape. Finally, these battle-tested wheels are centered on our award-winning Echo hubs. This wheelset is completely hand-built and acoustically tuned using Easton’s painstaking wheel building methods.
Page 1 of 5 Next page