A classic knobby version of the Aitken signature tire. Traditionally a more dirt-specific tire but the tire’s fast rolling center tread allows it to be used on all terrains. - 20 × 2.35 only Single ply casing
Odyssey racing spokes use butting dimensions that are tailor-made for BMX racing, and they’re still strong enough to handle some light street riding too. You’ll save roughly an ounce per wheel on 36’s. Only the best stainless steel has been used, and the gradual butting transitions are ideal for the stresses that a 20-inch wheel has to endure. - Proprietary professional-grade stainless steel. - BMX specific butting transition dimensions.
The new Gsport Uniguard is a simple, inexpensive functional guard that eliminates the need to spread the dropouts. It’s made from Heat-Treated Cr-Mo Steel and is LHD and RHD compatible as well as Drive and Non-Drive compatible. All bases covered. Available in 14mm or 3/8?.
WeThePeople's Grippin tire is an excellent all-around tire. With a semi-tread design and a durable, grippy rubber compound, this tire can rail dirt berms and vert ramps alike.
Protect your bars and prevent your grips from getting shredded with WeThePeople's Supreme Bar Ends. CNC machined from 6061 aluminum, these tough, bolt-in end caps protect your investment from tons of abuse when you have to jump ship on an imperfect execution of a trick. Simply slide them into the ends of your handlebars and tighten them up. Then, go nuts!
Ground breaking riding deserves a fork so burly fork that it can literally break the ground, should the need arise. WeThePeople's Sterling fork is masterfully crafted to meet the insane demands of team rider, Pete Sawyer. The Sterling can handle it all, and it looks good doing it. Find a matching color scheme on the Sterling signature frames too! • Material: Full-liquid post heat-treatment on 4130 “M2“ chromoly • Steerer Length: 170mm • Offset: 32mm • Dropout: 6mm laser cut & CNC machined, heat-treated 4130 chromoly, 3/8'' axle • Fully CNC’d steerer, single butted integrated crown race designed to work with integrated headsets with a 45° bearing
WeThePeople's Patron fork is all about choices. The 7mm full-investment casted heat-treated hollow dropouts are what make this fork so special and are offered in either a traditional 35mm offset or a more street orientated 25mm version for all the front-wheel jedis out there. This is the go to choice for most of the WTP pro team, so you know it's got to be good. • Material: Full-liquid post heat-treatment on 4130 “M2“ chromoly • Steerer Length: 170mm • Offset: 25mm or 35mm • Dropout: 7mm, full investment cast, heat-treated 4130 chromoly, 3/8'' axle • Fully CNC’d steerer, single butted integrated crown race designed to work with integrated headsets with a 45° bearing
A traditional clutch-based coaster hub design that eliminates all of the problematic elements on ordinary hubs and only keeps the parts that work. A new, super-strong axle, bearing configuration, and drag mechanism design stops the need for constant repairs. Equipped with external slack adjustment (can be adjusted without removing the rear wheel), and a plastic hub guard. FEATURES - Super-durable bearing arrangement throughout - Maximum strength axle design Unique external slack adjustment feature - Super-durable drag mechanism design GUARD OPTIONS - Plastic hub guard included (but optional to use) MEASUREMENTS - Drive Side Effective Flange Diameter: 56mm - Non-Drive Side Effective Flange Diameter: 49mm - Drive Side Flange to Center Distance: 27.5mm - Non-Drive Side Flange to Center Distance: 27.5mm
In addition to the anniversary sprocket, Odyssey also offers these retro seats that will coincide/match with their collaboration with Vans.
The Monolever was an instant classic and has become a clear favorite with pro riders around the world because of its familiar feel, smooth edges and variety of handle options.
Odyssey's original dual cable detangler system has been the industry standard since day one. Odyssey has been making the Gyro since 1986 and constantly improving it along the way. Everything you need to run a Gyro. Odyssey Gyro cables and upper and lower cable stops included.
Compatible cable for M2 Monolever.
This is Odyssey's top-of-the-line brake cable that ties together all of their most advanced braking technology. - Utilizes the original BMX Linear Slic Kable housing to prevent binding when the bars are rotated. - Factory installed ferrule ends with inner volcano shape to prevent housing blow out; a Linear Slic Kable standard since 2008. - Specially coated inner wire for ultra low friction, a proven feature resurrected from their once famous Brakeline cables. - Gyro lug included at one end of the inner wire for use with detanglers. - 60-65mm in length.
The QUADRANT uses a unique pinned junction design that allows Odyssey's lightest rim to also be their most affordable. With its offset spoke drilling, this rim is stronger than its weight suggests. The Quadrant is one of the few pinned rims that receives regular and unquestioned use by pro level riders. SPECS - 6000 series aluminum - Width: 34mm - Height: 18mm - ERD: 392mm - 36-H - 20 inches - 420 grams (14.8 oz)
As the name implies, this new version can be easily adjusted to cover 3 different lengths by utilizing the cable’s unique straddle interface connection. This tool-free feature allows the Adjustable Quik Slic Kable to be a one-size-fits-all cable for virtually every braking configuration. FEATURES - Adjustable hanger slot allows upper cable to rotate for optimum alignment. - The integrated hanger and straddle cable creates direct routing to brake arms with no bends or twists to reduce flex. - Linear K-Shield mesh housing offers higher compression rate and lighter weight than standard steel mesh. - All Odyssey Linear cables are offered with the K-Shield housing. - Specially designed and machined Volcano ferrules prevent premature housing blowout. Velcro strap included. SPECS - Housing length: 995mm - Frame requirements: Slotted cable stop and guides. 245mm (+/-3) distance from center brake boss to the front of the cable stop is recommended. - Brake requirements: Open-ended U-brake arms. - Works with most brake levers. - Velcro strap included.
One of the most important goals that Odyssey had when they sat down to work on new braking designs was to make the whole system easier to install (and remove) without sacrificing performance. They also wanted to be sure that every component would be very affordable. The Springfield brake drops the two ordinary (and confusing) brake springs and replaces them with one central spring that applies the same force to each arm, requiring no additional adjustment. This makes assembly incredibly easy–just bolt it on and go. The brake arms are designed to maximize stiffness and save weight without adding excessive cost. By die-casting the arms and using shared tooling to make each side, the Springfield meets all of the original design goals, resulting in a very powerful and affordable brake.
Aaron Ross's signature BOSS seat features an updated pattern to match his signature tires. Back by popular demand here’s the Fat Capital version. It features larger padding that wraps around Odyssey's custom designed, wider-shaped pivotal base. Specially reinforced for strength at all the right spots. This Tripod version provides a wider base, and slightly beefier padding and shape than its Pivotal counterpart. It offers a cleaner look, while still being reinforced for strength.
$9.99 - $22.99
- Press fit designed to work the hub's non-drive side collar.
$64.99 - $74.99
Using Odyssey's popular TL48 stem as a springboard, Tom Dugan's signature DGN stem is a classic top load design. FEATURES - Six bolt clamping configuration - Headset pre-load bolt recess (32mm diameter) - 6061-T6 aluminum, CNC machined
Tom Dugan’s signature grip features a timeless coil pattern, along with a feather design across the heavy wear areas. By using two molds you’ll notice feather angle symmetry once they’re installed. Par Ends included.
When you can’t even see a part, you might forget about it, but it doesn’t mean its not important. Flat tires are probably the most common bicycle failures. Many times, flats are caused by the rims, specifically the lack of protection from the rims' sharp edges. Good rim strips didn’t exist for BMX rims. They work well and improve the function of any 20 inch rim. If you forget about them, that means they are doing their job.
Tom likes to ride fast and go very high. These tires were designed to help him do just that. With a fast center tread, these tires are made for park, street and even dirt too. The side profile is reminiscent of a motorcycle tire as well, which is a nod to Tom’s motorcycle lovin’ ways.
The 4.5-inch peg features a full 4130 core with a long-lasting, fast-sliding, plastic sleeve. - Sold individually - 14mm with 3/8” adapters only - Replacement sleeves sold separately - 4.5" (length) x 1.5" (outer diameter) - 4.5 oz (9 oz for a pair)
$134.99 - $154.99
Odyssey's 41-Thermal forks quickly established a reputation for strength and quality when they originally introduced them in 1999, and they have since gone on to change the standards that all forks are judged by. The new R-Series forks continue this tradition. FEATURES - Fully redesigned. - Laboratory tested and team proven. - New, custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance. - All-new steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race. - New, optimized, 4mm dropout shape for grind and peg clearance. - Updated 7075-T6 pre-load bolt - Proven 41-Thermal® processed 4130 chromoly - Legendary lifetime replacement warranty SPECS - 25mm traditional offset - 3/8” axle slots only Starting at 1lb 15.2oz (885 grams)
$64.99 - $74.99
Using Odyssey's popular TL48 stem as a springboard, Aaron Ross’ signature BOSS stem is a classic top load design with 52mm of reach and a 35mm rise. FEATURES - Six bolt clamping configuration - Headset pre-load bolt recess (32mm diameter) - 6061-T6 aluminum, CNC machined SPECS - 52mm reach - 35mm rise - 11 oz
Replacement Sleeve for Odyssey's Graduate PC Peg. Sold individually.
$89.99 - $99.99
The original 7000 series aluminum BMX rim. This specialty grade of aluminum lets Odyssey produce a rim that is both lightweight and strong. The Seven-KA is a proven, go-to rim for pro-level riders worldwide. SPECS - 7000 series aluminum - Width: 34mm - Height: 17mm ERD: 390mm
- New ultra-slim 2014-T6 aluminum seat clamp with replaceable hardware and self-aligning nut. - 6061-T6 aluminum construction. - Standard 1-1/8-inch size.
- 4140 Chromoly - 3 Possible peg positions for longer peg life - 14mm with 3/8-inch adapters included - 4 inches (length) x 1-3/8 inches (outer diameter) - Sold in pairs - 8.75 oz (17.5 oz for a pair)
Designed specifically for use with Odyssey's Quartet FRONT or REAR hubs. SPECS - Forged from 7075-T6 aluminum for greater strength and durability - Steel insert prevents guard deformation, prolonging bearing life
Page 1 of 4 Next page